Hob and oven installation in Aldridge

Why do people in Aldridge choose hob and oven installation?

Keen cooks across the West Midlands often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models.

If your Aldridge kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking. If your home is in Aldridge or close by in Walsall or Bloxwich, the same survey, quote and fitting process applies.

What does the job involve?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Gas supply moved to a new hob position, with pipework tested and made good
Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
Old hob or oven disconnected safely and taken away for recycling
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer

Hob and oven installation prices in Aldridge

These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. Prices across the West Midlands are broadly in line with UK averages.

Hob and oven installation prices in Aldridge
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£300
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£250
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£400
New gas pipe run to a new hob positionPipework, testing and making good	£250–£800

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Aldridge homes

You will find Victorian terraces, 1930s semis, post-war council-built houses and post-war flats and maisonettes throughout the West Midlands. Victorian terraces often have a long galley behind the back room, while 1930s semis across Birmingham and the Black Country tend to have a small kitchen at the rear.

Birmingham's water is relatively soft, while much of the Black Country and Coventry is harder, so check your supplier's hardness figure before choosing a filter. Busy terraced streets, permit parking near town centres and blocks with shared lifts can each affect delivery times and how worktops reach the kitchen.

Do you need approval for hob and oven installation in Aldridge?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas and listed buildings, including parts of Birmingham and Solihull, may need consent for new vents, and flat owners usually need the freeholder's consent first.

Worth knowing before the fit

Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
If you are replacing an old cooker with a separate hob and oven in your Aldridge kitchen, ask for the gas supply position and condition to be checked first.
If you are moving the hob in your Aldridge kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.

Questions about hob and oven installation in Aldridge

How much does hob and oven installation cost in Aldridge?

Guide prices in Aldridge are about £120 to £300 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Aldridge before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Aldridge. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Also covering nearby towns

Neighbouring towns where we offer hob and oven installation: