Flat-pack kitchen fitting in Tonbridge

When does flat-pack kitchen fitting make sense in Tonbridge?

Flat-pack is a common choice in Tonbridge when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets.

First-time buyers in Tonbridge often choose a flat-pack range to replace a worn kitchen soon after moving in, keeping money aside for flooring and decorating. Kitchens in every part of Tonbridge are covered, and the survey visit is free wherever you are in Kent.

What is included in the work?

Your written quote lists everything included. For flat-pack kitchen fitting, that normally means:

Back panels fitted fully into their grooves or fixed as the instructions require
Wall units hung on hanging rails or brackets fixed securely into the wall
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Laminate worktops cut and jointed, with cut edges sealed around the sink
Free survey visit to check the plan, the boxes and the room
Base units levelled on adjustable legs and fixed to the wall and to each other

Flat-pack kitchen fitting prices in Tonbridge

The figures below are guide prices for Tonbridge, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Flat-pack kitchen fitting prices in Tonbridge
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,100–£3,400
Medium flat-pack kitchen, built and fittedAs above	£3,200–£4,800
Large flat-pack kitchen with tall units, built and fittedAs above	£4,600–£6,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Tonbridge?

You will find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions throughout Kent. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Building regulations, electrics and gas in Tonbridge

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Planning ahead

Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Set aside a room next to the kitchen in your Tonbridge home for assembly, with enough floor space to lay a tall larder carcass down flat.
Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.

Questions about flat-pack kitchen fitting in Tonbridge

How much does flat-pack kitchen fitting cost in Tonbridge?

Guide prices in Tonbridge are about £2,100 to £3,400 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Tonbridge do you work in?

All of them. Our Kent coverage takes in the whole of Tonbridge, including the TN9 postcode district, as well as surrounding towns such as Tunbridge Wells. If you are unsure, send us your postcode.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Flat-pack kitchen fitting near Tonbridge

We also carry out flat-pack kitchen fitting in these towns near Tonbridge: