Flat-pack kitchen fitting in Swanley

Who usually needs flat-pack kitchen fitting in Swanley?

If you are fitting a utility room as well as a kitchen in Swanley, flat-pack units for both rooms can be built and fitted as part of the same job.

Landlords in Kent sometimes choose flat-pack kitchens for rented homes, because matching doors and replacement parts can often be bought again later if a unit is damaged. Kitchens in every part of Swanley are covered, and the survey visit is free wherever you are in Kent.

What is in a typical job?

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Swanley kitchen after we have measured it:

Carcasses assembled on site on a flat surface and checked for square
Free survey visit to check the plan, the boxes and the room
Back panels fitted fully into their grooves or fixed as the instructions require
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Laminate worktops cut and jointed, with cut edges sealed around the sink
Wall units hung on hanging rails or brackets fixed securely into the wall

What does flat-pack kitchen fitting cost in Swanley?

As a starting point for Swanley, these ranges include VAT at 20% and allow for typical labour costs in the South East. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What does flat-pack kitchen fitting cost in Swanley?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,100–£3,400
Medium flat-pack kitchen, built and fittedAs above	£3,200–£4,800
Large flat-pack kitchen with tall units, built and fittedAs above	£4,600–£6,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Swanley homes

Across Kent you will often find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions, and each shapes the kitchen differently. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering. Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey.

Building regulations, electrics and gas in Swanley

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Planning ahead

Set aside a room next to the kitchen in your Swanley home for assembly, with enough floor space to lay a tall larder carcass down flat.
If your Swanley home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
Count the boxes against the delivery note when your flat-pack kitchen arrives in Swanley; orders can run to dozens of boxes and one short box can stall a fit.
Keep every bag of cam fittings, dowels and screws with its own box, as parts for different units often look almost identical.

Questions about flat-pack kitchen fitting in Swanley

How much does flat-pack kitchen fitting cost in Swanley?

Flat-pack kitchen fitting in Swanley typically costs £2,100 to £3,400 including VAT for a small flat-pack kitchen, built and fitted, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Swanley do you work in?

All of them. Our Kent coverage takes in the whole of Swanley, including the BR8 postcode district, as well as surrounding towns such as Bexley. If you are unsure, send us your postcode.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

Nearby places we cover

We also carry out flat-pack kitchen fitting in these towns near Swanley: