Flat-pack kitchen fitting in Solihull

Is flat-pack kitchen fitting right for your Solihull kitchen?

If your kitchen is in a Solihull flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself.

A Solihull kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed. We cover all of Solihull, including the B91 postcode district, and travel out to neighbouring towns across the West Midlands.

What we cover for flat-pack kitchen fitting in Solihull

After the survey visit we write the scope down. For flat-pack kitchen fitting in Solihull it usually covers:

Free survey visit to check the plan, the boxes and the room
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Back panels fitted fully into their grooves or fixed as the instructions require
Base units levelled on adjustable legs and fixed to the wall and to each other
Laminate worktops cut and jointed, with cut edges sealed around the sink
Wall units hung on hanging rails or brackets fixed securely into the wall

What should you budget for flat-pack kitchen fitting in Solihull?

These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. Costs in the West Midlands sit close to the national guide.

What should you budget for flat-pack kitchen fitting in Solihull?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,800–£3,000
Medium flat-pack kitchen, built and fittedAs above	£2,800–£4,200
Large flat-pack kitchen with tall units, built and fittedAs above	£4,000–£5,500

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Solihull homes

The housing mix across the West Midlands includes Victorian terraces, 1930s semis, post-war council-built houses and post-war flats and maisonettes, so no two kitchen fits are quite alike. Victorian terraces often have a long galley behind the back room, while 1930s semis across Birmingham and the Black Country tend to have a small kitchen at the rear.

Birmingham's water is relatively soft, while much of the Black Country and Coventry is harder, so check your supplier's hardness figure before choosing a filter. Busy terraced streets, permit parking near town centres and blocks with shared lifts can each affect delivery times and how worktops reach the kitchen.

Building regulations, electrics and gas in Solihull

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas and listed buildings, including parts of Birmingham and Solihull, may need consent for new vents, and flat owners usually need the freeholder's consent first.

Before you book flat-pack kitchen fitting in Solihull

Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
If the flat-pack sink base in your Solihull kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Keep every bag of cam fittings, dowels and screws with its own box, as parts for different units often look almost identical.

Questions about flat-pack kitchen fitting in Solihull

How much does flat-pack kitchen fitting cost in Solihull?

Flat-pack kitchen fitting in Solihull typically costs £1,800 to £3,000 including VAT for a small flat-pack kitchen, built and fitted, based on prices in the West Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Solihull do you work in?

All of them. Our West Midlands coverage takes in the whole of Solihull, including the B91 postcode district, as well as surrounding towns such as Shirley. If you are unsure, send us your postcode.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Nearby places we cover

The same service is available a short drive from Solihull, including: