Flat-pack kitchen fitting · Argyll and Bute
Flat-pack kitchen fitting in Oban
Need flat-pack kitchen fitting in Oban? Tell us about the kitchen and we will arrange a free, no-obligation survey to see what the job really involves.
Who usually needs flat-pack kitchen fitting in Oban?
If your kitchen is in an Oban flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself.
Landlords in Argyll and Bute sometimes choose flat-pack kitchens for rented homes, because matching doors and replacement parts can often be bought again later if a unit is damaged. We cover all of Oban, including the PA34 postcode district, and travel out to neighbouring towns across Argyll and Bute.
What we cover for flat-pack kitchen fitting in Oban
Here is what usually goes into flat-pack kitchen fitting, adjusted to your Oban kitchen after we have measured it:
- Wall units hung on hanging rails or brackets fixed securely into the wall
- Laminate worktops cut and jointed, with cut edges sealed around the sink
- Panels, plinths, sink, tap and appliance connections to existing points
- Carcasses assembled on site on a flat surface and checked for square
- Free survey visit to check the plan, the boxes and the room
- Base units levelled on adjustable legs and fixed to the wall and to each other
Flat-pack kitchen fitting prices in Oban
The figures below are guide prices for Oban, including VAT and adjusted for typical costs across Scotland. The fixed price comes after we have measured up. Labour rates in Scotland are generally lower than in London and the South East, so these ranges are a little below the national guide.
| Typical project | Guide price |
|---|---|
| Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be | £1,700–£2,800 |
| Medium flat-pack kitchen, built and fittedAs above | £2,600–£3,900 |
| Large flat-pack kitchen with tall units, built and fittedAs above | £3,800–£5,200 |
Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.
Kitchens in homes around Oban
In and around Oban, homes range across Victorian villas, whitewashed cottages, tenement flats and post-war bungalows. Victorian villas in Dunoon and Oban often have a separate scullery and a larger kitchen, while cottages and bungalows tend to have a compact room at the back.
Soft water is usual across Argyll and Bute, so limescale is rarely a concern, though rural homes on private supplies may need their own filtering. Long single-track roads are common, and some mainland addresses are quickest reached by ferry, so delivery dates, vehicle size and worktop lengths need planning around timetables and weather.
What rules apply to flat-pack kitchen fitting in Oban?
In Scotland, fitting flat-pack units is not work that needs a building warrant, and most electrical work in a house does not need one either, but it must meet the building standards and BS 7671 and be certified. A gas hob or cooker must be connected by a Gas Safe registered engineer. If a new hood or extract fan is fitted, it should provide the kitchen extract ventilation that standard 3.14 expects.
Parts of Cowal lie within Loch Lomond and The Trossachs National Park, and listed buildings or conservation areas may need consent for a new external vent.
Before you book flat-pack kitchen fitting in Oban
- Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
- Set aside a room next to the kitchen in your Oban home for assembly, with enough floor space to lay a tall larder carcass down flat.
- If your Oban home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
- Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.
Questions about flat-pack kitchen fitting in Oban
How much does flat-pack kitchen fitting cost in Oban?
Flat-pack kitchen fitting in Oban typically costs £1,700 to £2,800 including VAT for a small flat-pack kitchen, built and fitted, based on prices in Scotland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Which parts of Oban do you work in?
All of them. Our Argyll and Bute coverage takes in the whole of Oban, including the PA34 postcode district, as well as surrounding towns such as Dunoon. If you are unsure, send us your postcode.
Can you fit a flat-pack kitchen I have already started building?
Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.
How do you make sure flat-pack cabinets are square?
Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.
How do you protect a flat-pack sink unit from water?
Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.
Flat-pack kitchen fitting near Oban
We also carry out flat-pack kitchen fitting in these towns near Oban: