Flat-pack kitchen fitting in Merthyr Tydfil

Thinking about flat-pack kitchen fitting in Merthyr Tydfil?

If you have bought a flat-pack kitchen for your Merthyr Tydfil home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen.

First-time buyers in Merthyr Tydfil often choose a flat-pack range to replace a worn kitchen soon after moving in, keeping money aside for flooring and decorating. Our Mid Glamorgan coverage reaches every part of Merthyr Tydfil (CF47) and out towards Aberdare.

What does the job involve?

After the survey visit we write the scope down. For flat-pack kitchen fitting in Merthyr Tydfil it usually covers:

Laminate worktops cut and jointed, with cut edges sealed around the sink
Wall units hung on hanging rails or brackets fixed securely into the wall
Back panels fitted fully into their grooves or fixed as the instructions require
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Panels, plinths, sink, tap and appliance connections to existing points
Carcasses assembled on site on a flat surface and checked for square

What should you budget for flat-pack kitchen fitting in Merthyr Tydfil?

As a starting point for Merthyr Tydfil, these ranges include VAT at 20% and allow for typical labour costs in Wales. Costs across Wales tend to sit under UK averages, which these ranges reflect.

What should you budget for flat-pack kitchen fitting in Merthyr Tydfil?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,700–£2,800
Medium flat-pack kitchen, built and fittedAs above	£2,600–£3,900
Large flat-pack kitchen with tall units, built and fittedAs above	£3,700–£5,100

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Merthyr Tydfil homes

You will find valley terraces, post-war council-built houses, seaside bungalows and new-build estates throughout Mid Glamorgan. Valley terraces often have a narrow kitchen in a rear extension, while post-war houses in towns such as Bridgend tend to have a compact room beside the dining area.

Steep valley streets and terraces built into hillsides can mean steps, tight turns and limited parking, so carrying long worktops is planned at the survey. Soft water is usual across Mid Glamorgan, so limescale is less of a concern and taps and boiling water taps tend to stay cleaner.

Do you need approval for flat-pack kitchen fitting in Merthyr Tydfil?

In Wales, a flat-pack kitchen needs no planning permission, though a listed building may need listed building consent. Electrical rules are wider than in England, because extending an existing circuit within a kitchen is notifiable under Part P as well as new circuits and consumer unit changes. New sockets for the layout are therefore usually certified through a competent person scheme or building control. Gas work is for Gas Safe registered engineers only.

The northern fringe of the area falls within Bannau Brycheiniog National Park, and listed buildings or conservation areas may need consent for new external vents.

Tips before you start

If your Merthyr Tydfil home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.

Questions about flat-pack kitchen fitting in Merthyr Tydfil

How much does flat-pack kitchen fitting cost in Merthyr Tydfil?

Guide prices in Merthyr Tydfil are about £1,700 to £2,800 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Merthyr Tydfil as well?

Yes. As well as Merthyr Tydfil itself, we cover the rest of Mid Glamorgan and nearby towns such as Aberdare and Rhondda. The process is the same wherever the kitchen is.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Flat-pack kitchen fitting in neighbouring towns

We also carry out flat-pack kitchen fitting in these towns near Merthyr Tydfil: