Flat-pack kitchen fitting in Melton Mowbray

Why do people in Melton Mowbray choose flat-pack kitchen fitting?

First-time buyers in Melton Mowbray often choose a flat-pack range to replace a worn kitchen soon after moving in, keeping money aside for flooring and decorating.

Some people in Leicestershire start building their own flat-pack units, then call in a fitter when the walls, worktops and connections turn out to be the harder part. Melton Mowbray sits about 14 miles north-east of Leicester, and our Leicestershire coverage takes in everything in between.

What does the job involve?

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Melton Mowbray kitchen after we have measured it:

Free survey visit to check the plan, the boxes and the room
Laminate worktops cut and jointed, with cut edges sealed around the sink
Base units levelled on adjustable legs and fixed to the wall and to each other
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Back panels fitted fully into their grooves or fixed as the instructions require
Carcasses assembled on site on a flat surface and checked for square

Flat-pack kitchen fitting prices in Melton Mowbray

These guide ranges include VAT at 20% and are adjusted for prices in the East Midlands. We confirm your price in writing after a free survey visit. Costs in the East Midlands sit close to the national guide.

Flat-pack kitchen fitting prices in Melton Mowbray
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,700–£2,900
Medium flat-pack kitchen, built and fittedAs above	£2,700–£4,100
Large flat-pack kitchen with tall units, built and fittedAs above	£3,900–£5,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

House types around Melton Mowbray and what they mean for a kitchen

You will find Victorian terraces, 1930s semis, post-war estate houses and new-build estates throughout Leicestershire. Leicester's Victorian terraces often have a long galley behind the back room, while 1930s semis tend to have a small square kitchen with a door to the garden.

Densely parked terraced streets and homes without rear access can make unloading slow, so delivery times and the route for long worktops are worth agreeing early. Leicestershire's water is mostly moderately hard to hard, so limescale on taps and boiling water taps is likely and a filter or softener can help.

Regulations for kitchen work in Melton Mowbray

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Listed buildings and conservation areas, including some village centres and older parts of Leicester, may need consent for a new external vent or changes to historic features.

Before you book flat-pack kitchen fitting in Melton Mowbray

Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Count the boxes against the delivery note when your flat-pack kitchen arrives in Melton Mowbray; orders can run to dozens of boxes and one short box can stall a fit.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Wall unit fixings need to suit your walls, because plasterboard, old lime plaster and solid brick each call for a different approach.

Questions about flat-pack kitchen fitting in Melton Mowbray

How much does flat-pack kitchen fitting cost in Melton Mowbray?

For a small flat-pack kitchen, built and fitted, budget around £1,700 to £2,900 including VAT in Melton Mowbray. That reflects typical costs in the East Midlands; we confirm the actual figure in writing once we have measured up.

Do you cover all of Melton Mowbray?

Yes. We work across Melton Mowbray, including the LE13 postcode district, and nearby towns such as Oakham and Humberstone. Book a free survey visit and we will arrange a time that suits you.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Also covering nearby towns

Neighbouring towns where we offer flat-pack kitchen fitting: