Flat-pack kitchen fitting in Magherafelt

What prompts flat-pack kitchen fitting in Magherafelt?

If you are fitting a utility room as well as a kitchen in Magherafelt, flat-pack units for both rooms can be built and fitted as part of the same job.

If you have bought a flat-pack kitchen for your Magherafelt home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen. Homes right across Magherafelt are covered, as are nearby places such as Cookstown, Ballymena and the villages in between.

What does flat-pack kitchen fitting in Magherafelt include?

After the survey visit we write the scope down. For flat-pack kitchen fitting in Magherafelt it usually covers:

Wall units hung on hanging rails or brackets fixed securely into the wall
Carcasses assembled on site on a flat surface and checked for square
Laminate worktops cut and jointed, with cut edges sealed around the sink
Back panels fitted fully into their grooves or fixed as the instructions require
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Panels, plinths, sink, tap and appliance connections to existing points

Guide prices for flat-pack kitchen fitting in Magherafelt

As a starting point for Magherafelt, these ranges include VAT at 20% and allow for typical labour costs in Northern Ireland. Prices in Northern Ireland usually come in below the national guide, as labour rates are lower than in the South East.

Guide prices for flat-pack kitchen fitting in Magherafelt
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,600–£2,600
Medium flat-pack kitchen, built and fittedAs above	£2,500–£3,700
Large flat-pack kitchen with tall units, built and fittedAs above	£3,500–£4,800

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Magherafelt?

In and around Magherafelt, homes range across red-brick terraces, Georgian townhouses, rural bungalows and post-war estate houses. Terraced houses in the city and in Coleraine often have a narrow kitchen in the return, while rural bungalows tend to have a larger kitchen with space for dining.

Steep streets in the city, terraces with limited parking and long country roads can each affect deliveries, so the route for worktops is checked at the survey. County Londonderry's mains water is generally soft, so limescale is rarely a big problem and taps and boiling water taps tend to stay cleaner.

Do you need approval for flat-pack kitchen fitting in Magherafelt?

In Northern Ireland, a flat-pack kitchen fitted with the services left where they are needs no planning permission or building control application. Domestic electrical work has no notification scheme, but new sockets or circuits should be installed and tested to BS 7671 and certified. Gas hobs must be connected by a Gas Safe registered engineer, and Technical Booklet K gives the ventilation guidance for kitchens.

The historic walled city is a conservation area with many listed buildings, so new external vents or changes to historic features there may need consent first.

Worth knowing before the fit

Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
Set aside a room next to the kitchen in your Magherafelt home for assembly, with enough floor space to lay a tall larder carcass down flat.
Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.

Questions about flat-pack kitchen fitting in Magherafelt

How much does flat-pack kitchen fitting cost in Magherafelt?

Flat-pack kitchen fitting in Magherafelt typically costs £1,600 to £2,600 including VAT for a small flat-pack kitchen, built and fitted, based on prices in Northern Ireland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Magherafelt as well?

Yes. As well as Magherafelt itself, we cover the rest of County Londonderry and nearby towns such as Cookstown and Ballymena. The process is the same wherever the kitchen is.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

Also covering nearby towns

We also carry out flat-pack kitchen fitting in these towns near Magherafelt: