Flat-pack kitchen fitting in Lichfield

When does flat-pack kitchen fitting make sense in Lichfield?

If you have bought a flat-pack kitchen for your Lichfield home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen.

A Lichfield kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed. Lichfield sits about 27 miles south-east of Stoke-on-Trent, and our Staffordshire coverage takes in everything in between.

What is included in the work?

Your written quote lists everything included. For flat-pack kitchen fitting, that normally means:

Base units levelled on adjustable legs and fixed to the wall and to each other
Carcasses assembled on site on a flat surface and checked for square
Laminate worktops cut and jointed, with cut edges sealed around the sink
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Panels, plinths, sink, tap and appliance connections to existing points
Free survey visit to check the plan, the boxes and the room

Flat-pack kitchen fitting prices in Lichfield

The figures below are guide prices for Lichfield, including VAT and adjusted for typical costs across the West Midlands. The fixed price comes after we have measured up. Prices across the West Midlands are broadly in line with UK averages.

Flat-pack kitchen fitting prices in Lichfield
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,800–£3,000
Medium flat-pack kitchen, built and fittedAs above	£2,800–£4,200
Large flat-pack kitchen with tall units, built and fittedAs above	£4,000–£5,500

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

House types around Lichfield and what they mean for a kitchen

You will find Victorian terraces, 1930s semis, post-war estate houses and moorland stone cottages throughout Staffordshire. Terraces in Stoke-on-Trent often have a small kitchen in the rear offshoot, while 1930s semis and estate houses tend to have a compact kitchen beside the dining room.

Terraced streets with limited parking and narrow moorland lanes in the north of the county can complicate deliveries, so vehicle size and timing are planned ahead. Water across much of Staffordshire is moderately hard to hard, so limescale on taps and boiling water taps is worth planning for.

Building regulations, electrics and gas in Lichfield

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Homes within the Staffordshire part of the Peak District National Park, listed buildings and conservation areas may need consent for new vents or alterations to historic features.

Worth knowing before the fit

Set aside a room next to the kitchen in your Lichfield home for assembly, with enough floor space to lay a tall larder carcass down flat.
Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.

Questions about flat-pack kitchen fitting in Lichfield

How much does flat-pack kitchen fitting cost in Lichfield?

Guide prices in Lichfield are about £1,800 to £3,000 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Lichfield do you work in?

All of them. Our Staffordshire coverage takes in the whole of Lichfield, including the WS13 postcode district, as well as surrounding towns such as Burntwood. If you are unsure, send us your postcode.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Flat-pack kitchen fitting in neighbouring towns

Neighbouring towns where we offer flat-pack kitchen fitting: