Flat-pack kitchen fitting in Isleworth

Thinking about flat-pack kitchen fitting in Isleworth?

Flat-pack is a common choice in Isleworth when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets.

Some people in Greater London start building their own flat-pack units, then call in a fitter when the walls, worktops and connections turn out to be the harder part. Isleworth sits about 9 miles west of Westminster, and our Greater London coverage takes in everything in between.

What does flat-pack kitchen fitting in Isleworth include?

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Isleworth kitchen after we have measured it:

Carcasses assembled on site on a flat surface and checked for square
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Panels, plinths, sink, tap and appliance connections to existing points
Free survey visit to check the plan, the boxes and the room
Wall units hung on hanging rails or brackets fixed securely into the wall
Base units levelled on adjustable legs and fixed to the wall and to each other

Flat-pack kitchen fitting prices in Isleworth

As a starting point for Isleworth, these ranges include VAT at 20% and allow for typical labour costs in London. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

Flat-pack kitchen fitting prices in Isleworth
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,300–£3,900
Medium flat-pack kitchen, built and fittedAs above	£3,600–£5,500
Large flat-pack kitchen with tall units, built and fittedAs above	£5,200–£7,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Isleworth homes

Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

What rules apply to flat-pack kitchen fitting in Isleworth?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

Set aside a room next to the kitchen in your Isleworth home for assembly, with enough floor space to lay a tall larder carcass down flat.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
If your Isleworth home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.

Questions about flat-pack kitchen fitting in Isleworth

How much does flat-pack kitchen fitting cost in Isleworth?

Flat-pack kitchen fitting in Isleworth typically costs £2,300 to £3,900 including VAT for a small flat-pack kitchen, built and fitted, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Isleworth before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Isleworth. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Flat-pack kitchen fitting in neighbouring towns

The same service is available a short drive from Isleworth, including: