Flat-pack kitchen fitting in Horsham

Thinking about flat-pack kitchen fitting in Horsham?

Landlords in West Sussex sometimes choose flat-pack kitchens for rented homes, because matching doors and replacement parts can often be bought again later if a unit is damaged.

A Horsham kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed. Homes right across Horsham are covered, as are nearby places such as Crawley, Horley and the villages in between.

What we cover for flat-pack kitchen fitting in Horsham

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Wall units hung on hanging rails or brackets fixed securely into the wall
Free survey visit to check the plan, the boxes and the room
Carcasses assembled on site on a flat surface and checked for square
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Back panels fitted fully into their grooves or fixed as the instructions require
Base units levelled on adjustable legs and fixed to the wall and to each other

What should you budget for flat-pack kitchen fitting in Horsham?

As a starting point for Horsham, these ranges include VAT at 20% and allow for typical labour costs in the South East. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

What should you budget for flat-pack kitchen fitting in Horsham?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,100–£3,400
Medium flat-pack kitchen, built and fittedAs above	£3,200–£4,800
Large flat-pack kitchen with tall units, built and fittedAs above	£4,600–£6,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

House types around Horsham and what they mean for a kitchen

In and around Horsham, homes range across 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.

Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey. West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering.

Regulations for kitchen work in Horsham

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.

Practical advice for Horsham homeowners

Set aside a room next to the kitchen in your Horsham home for assembly, with enough floor space to lay a tall larder carcass down flat.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
If your Horsham home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.

Questions about flat-pack kitchen fitting in Horsham

How much does flat-pack kitchen fitting cost in Horsham?

For a small flat-pack kitchen, built and fitted, budget around £2,100 to £3,400 including VAT in Horsham. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Which parts of Horsham do you work in?

All of them. Our West Sussex coverage takes in the whole of Horsham, including the RH12 postcode district, as well as surrounding towns such as Crawley. If you are unsure, send us your postcode.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Flat-pack kitchen fitting in neighbouring towns

Close to Horsham? We cover these nearby towns too: