Flat-pack kitchen fitting · Scotland
Flat-pack kitchen fitting in Glasgow
Our flat-pack kitchen fitting work covers the whole of Glasgow, and we also work in neighbouring Dunbartonshire and Renfrewshire and Inverclyde.
Why flat-pack kitchen fitting for a Glasgow home?
If your kitchen is in a Glasgow flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself.
Flat-pack is a common choice in Glasgow when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets.
What does flat-pack kitchen fitting in Glasgow include?
After the survey visit we write the scope down. For flat-pack kitchen fitting in Glasgow it usually covers:
- Free survey visit to check the plan, the boxes and the room
- Carcasses assembled on site on a flat surface and checked for square
- Back panels fitted fully into their grooves or fixed as the instructions require
- Base units levelled on adjustable legs and fixed to the wall and to each other
- Wall units hung on hanging rails or brackets fixed securely into the wall
- Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
- Laminate worktops cut and jointed, with cut edges sealed around the sink
- Panels, plinths, sink, tap and appliance connections to existing points
How much does flat-pack kitchen fitting cost in Glasgow?
As a starting point for Glasgow, these ranges include VAT at 20% and allow for typical labour costs in Edinburgh and Glasgow. For Edinburgh and Glasgow, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be | £1,800–£3,100 |
| Medium flat-pack kitchen, built and fittedAs above | £2,900–£4,300 |
| Large flat-pack kitchen with tall units, built and fittedAs above | £4,100–£5,600 |
Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.
Kitchens in homes across Glasgow
Across Glasgow you will often find sandstone tenement flats, Victorian terraces and villas, four-in-a-block flats and post-war high-rise flats, and each shapes the kitchen differently. Tenement flats often have a kitchen off the hall, sometimes with an old bed recess, while four-in-a-block flats tend to have a narrow galley at the back.
Glasgow's mains water is soft, much of it from Loch Katrine, so limescale is rarely a problem and taps and boiling water taps stay cleaner. Tenement closes and common stairs mean carrying units by hand, often to upper floors, and permit parking near the door may need arranging for delivery day.
Tenement kitchens often have high ceilings and a former bed recess, which can take tall units, a fridge freezer or a small dining nook. Four-in-a-block flats and ex-council houses more often need a full refit with new wiring, better storage and a more practical layout.
Rules for flat-pack kitchen fitting in Glasgow
In Scotland, fitting flat-pack units is not work that needs a building warrant, and most electrical work in a house does not need one either, but it must meet the building standards and BS 7671 and be certified. A gas hob or cooker must be connected by a Gas Safe registered engineer. If a new hood or extract fan is fitted, it should provide the kitchen extract ventilation that standard 3.14 expects.
Many of the city's tenement streets, including much of the West End, are conservation areas, so a new external vent may need consent, and common walls involve neighbours.
Before you start
- Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.
- Keep every bag of cam fittings, dowels and screws with its own box, as parts for different units often look almost identical.
- Wall unit fixings need to suit your walls, because plasterboard, old lime plaster and solid brick each call for a different approach.
- Clear a space next to the kitchen for assembly; carcasses need a flat floor and room to be checked for square before fitting.
- Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
- If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Questions about flat-pack kitchen fitting in Glasgow
How much does flat-pack kitchen fitting cost in Glasgow?
For a small flat-pack kitchen, built and fitted, budget around £1,800 to £3,100 including VAT in Glasgow. That reflects typical costs in Edinburgh and Glasgow; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of Glasgow?
Yes. We carry out flat-pack kitchen fitting across Glasgow. Every job starts with a free survey visit and an itemised written quote.
How do you protect a flat-pack sink unit from water?
Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.
Are flat-pack wall units strong enough once they are hung?
Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.
How do you make sure flat-pack cabinets are square?
Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.