Flat-pack kitchen fitting in Egham

Is flat-pack kitchen fitting right for your Egham kitchen?

Flat-pack is a common choice in Egham when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets.

If you have bought a flat-pack kitchen for your Egham home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen. We work throughout Egham (TW20) and across the wider Surrey area.

What does flat-pack kitchen fitting in Egham include?

After the survey visit we write the scope down. For flat-pack kitchen fitting in Egham it usually covers:

Base units levelled on adjustable legs and fixed to the wall and to each other
Laminate worktops cut and jointed, with cut edges sealed around the sink
Wall units hung on hanging rails or brackets fixed securely into the wall
Back panels fitted fully into their grooves or fixed as the instructions require
Panels, plinths, sink, tap and appliance connections to existing points
Free survey visit to check the plan, the boxes and the room

What should you budget for flat-pack kitchen fitting in Egham?

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What should you budget for flat-pack kitchen fitting in Egham?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,100–£3,400
Medium flat-pack kitchen, built and fittedAs above	£3,200–£4,800
Large flat-pack kitchen with tall units, built and fittedAs above	£4,600–£6,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Egham?

Across Surrey you will often find 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates, and each shapes the kitchen differently. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day. Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering.

Do you need approval for flat-pack kitchen fitting in Egham?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Tips before you start

If your Egham home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Set aside a room next to the kitchen in your Egham home for assembly, with enough floor space to lay a tall larder carcass down flat.
Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.

Questions about flat-pack kitchen fitting in Egham

How much does flat-pack kitchen fitting cost in Egham?

Flat-pack kitchen fitting in Egham typically costs £2,100 to £3,400 including VAT for a small flat-pack kitchen, built and fitted, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Egham?

Yes. We work across Egham, including the TW20 postcode district, and nearby towns such as Staines and Chertsey. Book a free survey visit and we will arrange a time that suits you.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Also covering nearby towns

We also carry out flat-pack kitchen fitting in these towns near Egham: