Flat-pack kitchen fitting · Northern Ireland
Flat-pack kitchen fitting in County Antrim
Our flat-pack kitchen fitting work covers the whole of County Antrim, including Belfast, Lisburn and Newtownabbey.
Thinking about flat-pack kitchen fitting in County Antrim?
Landlords in County Antrim sometimes choose flat-pack kitchens for rented homes, because matching doors and replacement parts can often be bought again later if a unit is damaged.
Flat-pack is a common choice in County Antrim when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets.
What does flat-pack kitchen fitting in County Antrim include?
After the survey visit we write the scope down. For flat-pack kitchen fitting in County Antrim it usually covers:
- Free survey visit to check the plan, the boxes and the room
- Carcasses assembled on site on a flat surface and checked for square
- Back panels fitted fully into their grooves or fixed as the instructions require
- Base units levelled on adjustable legs and fixed to the wall and to each other
- Wall units hung on hanging rails or brackets fixed securely into the wall
- Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
- Laminate worktops cut and jointed, with cut edges sealed around the sink
- Panels, plinths, sink, tap and appliance connections to existing points
How much does flat-pack kitchen fitting cost in County Antrim?
The figures below are guide prices for County Antrim, including VAT and adjusted for typical costs across Northern Ireland. The fixed price comes after we have measured up. Prices in Northern Ireland usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be | £1,600–£2,600 |
| Medium flat-pack kitchen, built and fittedAs above | £2,500–£3,700 |
| Large flat-pack kitchen with tall units, built and fittedAs above | £3,500–£4,800 |
Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.
Kitchens in homes across County Antrim
Across County Antrim you will often find red-brick terraces, Victorian villas, post-war estate houses and rural bungalows, and each shapes the kitchen differently. Red-brick terraces in Belfast often have a narrow kitchen in the return, while estate houses and rural bungalows tend to have a separate kitchen with room for a table.
Mains water across most of County Antrim is soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner. Terraced streets with entries at the back, city flats with booked lifts and country lanes can each affect deliveries, so the route for worktops is checked at the survey.
Opening the return kitchen of a Belfast terrace into the living room is a common way to make a kitchen-diner. Rural bungalows often run on oil-fired heating, and owners frequently want a larger kitchen with a utility room for boots and laundry.
Rules for flat-pack kitchen fitting in County Antrim
In Northern Ireland, a flat-pack kitchen fitted with the services left where they are needs no planning permission or building control application. Domestic electrical work has no notification scheme, but new sockets or circuits should be installed and tested to BS 7671 and certified. Gas hobs must be connected by a Gas Safe registered engineer, and Technical Booklet K gives the ventilation guidance for kitchens.
Listed buildings and conservation areas in older parts of Belfast and the county towns may need consent for new vents, and apartment owners usually need management consent.
Before you start
- Wall unit fixings need to suit your walls, because plasterboard, old lime plaster and solid brick each call for a different approach.
- Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.
- Allow extra time on site: a small flat-pack kitchen typically takes four to six days, against three to five for rigid units.
- Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.
- Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
- If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Questions about flat-pack kitchen fitting in County Antrim
How much does flat-pack kitchen fitting cost in County Antrim?
Guide prices in County Antrim are about £1,600 to £2,600 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of County Antrim?
Yes. We carry out flat-pack kitchen fitting across County Antrim, including Belfast, Lisburn, Newtownabbey and Carrickfergus. Every job starts with a free survey visit and an itemised written quote.
Can you fit a flat-pack kitchen I have already started building?
Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.
What is the difference between flat-pack and rigid kitchen units?
Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.
How do you protect a flat-pack sink unit from water?
Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.
Flat-pack kitchen fitting in towns across County Antrim
Choose a town for local guide prices and postcode coverage:
- Flat-pack kitchen fitting in Belfast
- Flat-pack kitchen fitting in Lisburn
- Flat-pack kitchen fitting in Newtownabbey
- Flat-pack kitchen fitting in Carrickfergus
- Flat-pack kitchen fitting in Ballymena
- Flat-pack kitchen fitting in Antrim
- Flat-pack kitchen fitting in Larne
- Flat-pack kitchen fitting in Ballymoney