Flat-pack kitchen fitting in Cardigan

Why do people in Cardigan choose flat-pack kitchen fitting?

First-time buyers in Cardigan often choose a flat-pack range to replace a worn kitchen soon after moving in, keeping money aside for flooring and decorating.

If your kitchen is in a Cardigan flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself. Our Dyfed coverage reaches every part of Cardigan (SA43) and out towards Carmarthen.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Carcasses assembled on site on a flat surface and checked for square
Back panels fitted fully into their grooves or fixed as the instructions require
Free survey visit to check the plan, the boxes and the room
Laminate worktops cut and jointed, with cut edges sealed around the sink
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Panels, plinths, sink, tap and appliance connections to existing points

Flat-pack kitchen fitting prices in Cardigan

Typical flat-pack kitchen fitting prices for homes in Cardigan, including VAT and adjusted for Wales. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in Wales usually come in below the national guide, as labour rates are lower than in the South East.

Flat-pack kitchen fitting prices in Cardigan
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,700–£2,800
Medium flat-pack kitchen, built and fittedAs above	£2,600–£3,900
Large flat-pack kitchen with tall units, built and fittedAs above	£3,700–£5,100

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Cardigan?

Typical homes in this part of Dyfed include stone cottages, Victorian terraces, farmhouses and post-war bungalows. Stone cottages and farmhouses often have a small kitchen in a rear extension, while terraces in Llanelli and Aberystwyth tend to have a narrow galley at the back.

Rural farm tracks, steep coastal lanes and long distances between villages can affect delivery vehicles, so worktop lengths and timing need planning ahead. Mains water across most of Dyfed is soft, so limescale is rarely a big problem, though farms on private supplies may need their own filtering.

Do you need approval for flat-pack kitchen fitting in Cardigan?

In Wales, a flat-pack kitchen needs no planning permission, though a listed building may need listed building consent. Electrical rules are wider than in England, because extending an existing circuit within a kitchen is notifiable under Part P as well as new circuits and consumer unit changes. New sockets for the layout are therefore usually certified through a competent person scheme or building control. Gas work is for Gas Safe registered engineers only.

Homes in the Pembrokeshire Coast National Park or Bannau Brycheiniog, listed cottages and conservation areas may need consent for a new external vent or historic alterations.

Practical advice for Cardigan homeowners

Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Set aside a room next to the kitchen in your Cardigan home for assembly, with enough floor space to lay a tall larder carcass down flat.
Allow extra time on site: a small flat-pack kitchen typically takes four to six days, against three to five for rigid units.

Questions about flat-pack kitchen fitting in Cardigan

How much does flat-pack kitchen fitting cost in Cardigan?

Guide prices in Cardigan are about £1,700 to £2,800 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Cardigan do you work in?

All of them. Our Dyfed coverage takes in the whole of Cardigan, including the SA43 postcode district, as well as surrounding towns such as Carmarthen. If you are unsure, send us your postcode.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

Also covering nearby towns

We also carry out flat-pack kitchen fitting in these towns near Cardigan: