Kitchen Installers UK

Flat-pack kitchen fitting · South Glamorgan

Flat-pack kitchen fitting in Cardiff

Flat-pack kitchen fitting in Cardiff starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.

Guide price£1,700 to £5,100
Postcodes includeCF10, CF11, CF14 and CF15
Timescale4 to 6 days for a small kitchen
A fitter assembling a white flat-pack base cabinet on a dust sheet, with cam fittings and a cordless drill beside it

What prompts flat-pack kitchen fitting in Cardiff?

Flat-pack is a common choice in Cardiff when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets.

If you have bought a flat-pack kitchen for your Cardiff home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen. We cover all of Cardiff, including the CF10, CF11, CF14, CF15, CF23 and CF24 postcode districts, and travel out to neighbouring towns across South Glamorgan.

What does the job involve?

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Cardiff kitchen after we have measured it:

  • Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
  • Wall units hung on hanging rails or brackets fixed securely into the wall
  • Carcasses assembled on site on a flat surface and checked for square
  • Laminate worktops cut and jointed, with cut edges sealed around the sink
  • Base units levelled on adjustable legs and fixed to the wall and to each other
  • Back panels fitted fully into their grooves or fixed as the instructions require

How much does flat-pack kitchen fitting cost in Cardiff?

The figures below are guide prices for Cardiff, including VAT and adjusted for typical costs across Wales. The fixed price comes after we have measured up. Prices in Wales usually come in below the national guide, as labour rates are lower than in the South East.

How much does flat-pack kitchen fitting cost in Cardiff?
Typical projectGuide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be£1,700–£2,800
Medium flat-pack kitchen, built and fittedAs above£2,600–£3,900
Large flat-pack kitchen with tall units, built and fittedAs above£3,700–£5,100

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of South Glamorgan include Victorian terraces, Edwardian villas, post-war estate houses and waterfront apartments. Cardiff's Victorian terraces often have a long galley in the back addition, while Edwardian villas in Penarth may have a separate kitchen and breakfast room.

Busy on-street parking in terraced areas and apartment blocks with booked lifts can affect delivery times and how long worktops are carried in. Much of South Glamorgan has soft to moderately soft water, though some parts are harder, so check with your supplier before choosing a filter.

What rules apply to flat-pack kitchen fitting in Cardiff?

In Wales, a flat-pack kitchen needs no planning permission, though a listed building may need listed building consent. Electrical rules are wider than in England, because extending an existing circuit within a kitchen is notifiable under Part P as well as new circuits and consumer unit changes. New sockets for the layout are therefore usually certified through a competent person scheme or building control. Gas work is for Gas Safe registered engineers only.

Listed buildings and conservation areas, including parts of Cardiff and Penarth, may need consent for new vents, and apartment owners usually need the freeholder's consent.

Getting the most from your flat-pack kitchen fitting

  • Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
  • Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
  • If your Cardiff home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
  • Clear a space next to the kitchen for assembly; carcasses need a flat floor and room to be checked for square before fitting.

Questions about flat-pack kitchen fitting in Cardiff

How much does flat-pack kitchen fitting cost in Cardiff?

For a small flat-pack kitchen, built and fitted, budget around £1,700 to £2,800 including VAT in Cardiff. That reflects typical costs in Wales; we confirm the actual figure in writing once we have measured up.

Which parts of Cardiff do you work in?

All of them. Our South Glamorgan coverage takes in the whole of Cardiff, including the CF10, CF11, CF14, CF15, CF23 and CF24 postcode districts, as well as surrounding towns such as Penarth. If you are unsure, send us your postcode.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Flat-pack kitchen fitting near Cardiff

The same service is available a short drive from Cardiff, including:

Other kitchen work in Cardiff

Free survey visit

Book a free survey visit in Cardiff

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price