Fit-only kitchen fitting in Wrexham

Why do people in Wrexham choose fit-only kitchen fitting?

Landlords and small developers across Clwyd sometimes buy units for several properties at once and want a clear fit-only price for each kitchen they need installed.

If you are renovating a house in Wrexham yourself, buying the kitchen direct and paying only for fitting keeps the choice of units and the budget in your hands. If your home is in Wrexham or close by in Rhosllannerchrugog or Buckley, the same survey, quote and fitting process applies.

What does fit-only kitchen fitting in Wrexham include?

Here is what usually goes into fit-only kitchen fitting, adjusted to your Wrexham kitchen after we have measured it:

Packaging and offcuts cleared, with removal of the old kitchen available as an extra
Delivery checked against the plan and delivery note before fitting starts
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Sink, tap and appliances connected to the existing water, waste and power points
Free survey visit to check your plan, the room and the service positions

Guide prices for fit-only kitchen fitting in Wrexham

These guide ranges include VAT at 20% and are adjusted for prices in Wales. We confirm your price in writing after a free survey visit. Labour rates in Wales are generally lower than in London and the South East, so these ranges are a little below the national guide.

Guide prices for fit-only kitchen fitting in Wrexham
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,400–£2,300
Medium kitchen (10–15 units)As above	£2,300–£3,200
Large kitchen (15+ units, island or tall larders)As above	£3,200–£4,100
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£170–£260 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of Clwyd include Victorian terraces, stone cottages, seaside bungalows and post-war council-built houses. Terraced houses in Wrexham and Rhyl often have a narrow back kitchen, while bungalows along the coast tend to have a compact square kitchen.

Hill villages, farm tracks and coastal flats without lifts can complicate deliveries, so the route for long worktops is checked when the kitchen is surveyed. Hardness varies across Clwyd, so check with your supplier; where water is softer, taps and boiling water taps suffer much less limescale.

Building regulations, electrics and gas in Wrexham

In Wales a fit-only kitchen needs no planning permission, though a listed building may need listed building consent. The electrics are where Wales differs: extending an existing circuit within a kitchen is notifiable under Part P, as are new circuits, so even an extra socket for an appliance is certified through a competent person scheme or building control. Gas hobs are connected by Gas Safe registered engineers only, and extraction should meet Approved Document F.

A straightforward kitchen fit needs no planning permission, though listed buildings and conservation areas in older towns and villages may need consent for a new external vent.

Worth knowing before the fit

Photograph each pallet and any damaged box as it arrives at your Wrexham address, and note the damage on the delivery note before the driver leaves.
Leave appliance manuals in their boxes; they give the housing sizes and ventilation gaps needed to install each appliance correctly in your Wrexham kitchen.
Order handles in the right quantity with one or two spares; doors and drawers cannot be finished without them, and missing handles hold up sign-off.
Store the boxes flat in a dry, heated room rather than a damp garage, so doors and carcasses do not swell or warp before fitting.

Questions about fit-only kitchen fitting in Wrexham

How much does fit-only kitchen fitting cost in Wrexham?

Fit-only kitchen fitting in Wrexham typically costs £1,400 to £2,300 including VAT for a small kitchen of 5 to 10 units, based on prices in Wales. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Wrexham as well?

Yes. As well as Wrexham itself, we cover the rest of Clwyd and nearby towns such as Rhosllannerchrugog and Buckley. The process is the same wherever the kitchen is.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Fit-only kitchen fitting near Wrexham

Close to Wrexham? We cover these nearby towns too: