Fit-only kitchen fitting in Swanscombe

Why fit-only kitchen fitting for a Swanscombe home?

A Swanscombe kitchen with sound walls and services already in the right place suits fit only well, because the job is mainly units, worktops and connections.

Plenty of homeowners in Swanscombe buy a kitchen in a sale or from an online supplier, then look for someone to fit it once the delivery date is booked. Homes right across Swanscombe are covered, as are nearby places such as Grays, Gravesend and the villages in between.

What is included in the work?

After the survey visit we write the scope down. For fit-only kitchen fitting in Swanscombe it usually covers:

Doors and drawer fronts hung and adjusted, with handles drilled and fitted
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Delivery checked against the plan and delivery note before fitting starts
Laminate or wood worktops cut, jointed, sealed and fixed down
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
Packaging and offcuts cleared, with removal of the old kitchen available as an extra

Guide prices for fit-only kitchen fitting in Swanscombe

The figures below are guide prices for Swanscombe, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Guide prices for fit-only kitchen fitting in Swanscombe
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,700–£2,900
Medium kitchen (10–15 units)As above	£2,900–£4,000
Large kitchen (15+ units, island or tall larders)As above	£4,000–£5,200
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£210–£320 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Local homes and their kitchens

In and around Swanscombe, homes range across Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Do you need approval for fit-only kitchen fitting in Swanscombe?

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Getting the most from your fit-only kitchen fitting

Photograph each pallet and any damaged box as it arrives at your Swanscombe address, and note the damage on the delivery note before the driver leaves.
Ask your supplier for the full order list as well as the plan, so the fitter can check part numbers and not just unit sizes.
Book the fit for a date after the full delivery has arrived in Kent; a split delivery is a common reason for a fit stalling halfway.
Worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste are easy to leave off an order.

Questions about fit-only kitchen fitting in Swanscombe

How much does fit-only kitchen fitting cost in Swanscombe?

For a small kitchen of 5 to 10 units, budget around £1,700 to £2,900 including VAT in Swanscombe. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Which parts of Swanscombe do you work in?

All of them. Our Kent coverage takes in the whole of Swanscombe, including the DA11 postcode district, as well as surrounding towns such as Grays. If you are unsure, send us your postcode.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Nearby places we cover

We also carry out fit-only kitchen fitting in these towns near Swanscombe: