Fit-only kitchen fitting in Rochester

Why fit-only kitchen fitting for a Rochester home?

If you have chosen stone worktops for a Rochester kitchen, fit only gets the base units level and fixed so they are ready when the fabricator arrives to template.

People in Kent who have bought from a trade counter often want a fitter who will check the plan against the room before any boxes are opened. Kitchens in every part of Rochester are covered, and the survey visit is free wherever you are in Kent.

What we cover for fit-only kitchen fitting in Rochester

Here is what usually goes into fit-only kitchen fitting, adjusted to your Rochester kitchen after we have measured it:

Delivery checked against the plan and delivery note before fitting starts
Free survey visit to check your plan, the room and the service positions
Laminate or wood worktops cut, jointed, sealed and fixed down
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
Packaging and offcuts cleared, with removal of the old kitchen available as an extra
Doors and drawer fronts hung and adjusted, with handles drilled and fitted

Fit-only kitchen fitting prices in Rochester

The figures below are guide prices for Rochester, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Fit-only kitchen fitting prices in Rochester
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,700–£2,900
Medium kitchen (10–15 units)As above	£2,900–£4,000
Large kitchen (15+ units, island or tall larders)As above	£4,000–£5,200
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£210–£320 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Rochester homes

The housing mix across Kent includes Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions, so no two kitchen fits are quite alike. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

What rules apply to fit-only kitchen fitting in Rochester?

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Planning ahead

Ask your supplier for the full order list as well as the plan, so the fitter can check part numbers and not just unit sizes.
Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Photograph each pallet and any damaged box as it arrives at your Rochester address, and note the damage on the delivery note before the driver leaves.
Worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste are easy to leave off an order.

Questions about fit-only kitchen fitting in Rochester

How much does fit-only kitchen fitting cost in Rochester?

Guide prices in Rochester are about £1,700 to £2,900 including VAT for a small kitchen of 5 to 10 units. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Rochester do you work in?

All of them. Our Kent coverage takes in the whole of Rochester, including the ME1 postcode district, as well as surrounding towns such as Chatham. If you are unsure, send us your postcode.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Fit-only kitchen fitting in neighbouring towns

Neighbouring towns where we offer fit-only kitchen fitting: