Fit-only kitchen fitting in Dunfermline

Is fit-only kitchen fitting right for your Dunfermline kitchen?

If your kitchen is ordered for delivery to your Dunfermline home and the retailer does not offer fitting, fit only covers the labour to put it in properly.

A Dunfermline kitchen with sound walls and services already in the right place suits fit only well, because the job is mainly units, worktops and connections. Our Fife coverage reaches every part of Dunfermline (KY12) and out towards Broxburn.

What is included in the work?

After the survey visit we write the scope down. For fit-only kitchen fitting in Dunfermline it usually covers:

End panels, filler panels, plinths, cornice and light rail scribed and fitted
Sink, tap and appliances connected to the existing water, waste and power points
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
Free survey visit to check your plan, the room and the service positions
Delivery checked against the plan and delivery note before fitting starts
Laminate or wood worktops cut, jointed, sealed and fixed down

Fit-only kitchen fitting prices in Dunfermline

As a starting point for Dunfermline, these ranges include VAT at 20% and allow for typical labour costs in Scotland. Prices in Scotland usually come in below the national guide, as labour rates are lower than in the South East.

Fit-only kitchen fitting prices in Dunfermline
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,400–£2,400
Medium kitchen (10–15 units)As above	£2,400–£3,300
Large kitchen (15+ units, island or tall larders)As above	£3,300–£4,200
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£170–£260 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Dunfermline?

Across Fife you will often find pantiled fishing cottages, sandstone tenement flats, post-war council-built houses and new-build estates, and each shapes the kitchen differently. Fishing cottages in the coastal villages often have a tiny kitchen at the back, while ex-council houses and new-builds around Dunfermline and Glenrothes tend to have compact L-shaped rooms.

Narrow coastal village streets with little parking can make deliveries tricky, while new-town estates usually have easier access for vans and long worktops. Fife's mains water is soft, so limescale is rarely a big concern and taps and boiling water taps tend to stay cleaner.

Building regulations, electrics and gas in Dunfermline

In Scotland, fitting kitchen units you have bought does not need a building warrant, and nor does most electrical work in a house, but the work must still meet the building standards and BS 7671. Ask the electrician for an Electrical Installation Certificate or Minor Works Certificate. Gas hobs and cookers must be connected by a Gas Safe registered engineer, and the kitchen should keep extract ventilation that meets standard 3.14.

Listed cottages and conservation areas, including St Andrews and the East Neuk villages, may need consent for a new vent on a visible wall.

Planning ahead

Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Photograph each pallet and any damaged box as it arrives at your Dunfermline address, and note the damage on the delivery note before the driver leaves.
Order handles in the right quantity with one or two spares; doors and drawers cannot be finished without them, and missing handles hold up sign-off.
Measure integrated appliances against the housings on the plan, including ventilation gaps, before buying them separately from the kitchen.

Questions about fit-only kitchen fitting in Dunfermline

How much does fit-only kitchen fitting cost in Dunfermline?

Guide prices in Dunfermline are about £1,400 to £2,400 including VAT for a small kitchen of 5 to 10 units. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Dunfermline do you work in?

All of them. Our Fife coverage takes in the whole of Dunfermline, including the KY12 postcode district, as well as surrounding towns such as Broxburn. If you are unsure, send us your postcode.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Fit-only kitchen fitting in neighbouring towns

We also carry out fit-only kitchen fitting in these towns near Dunfermline: