Fit-only kitchen fitting in Coulsdon

When does fit-only kitchen fitting make sense in Coulsdon?

If your kitchen is ordered for delivery to your Coulsdon home and the retailer does not offer fitting, fit only covers the labour to put it in properly.

If you have chosen stone worktops for a Coulsdon kitchen, fit only gets the base units level and fixed so they are ready when the fabricator arrives to template. Homes right across Coulsdon are covered, as are nearby places such as Purley, Banstead and the villages in between.

What does fit-only kitchen fitting in Coulsdon include?

Here is what usually goes into fit-only kitchen fitting, adjusted to your Coulsdon kitchen after we have measured it:

Free survey visit to check your plan, the room and the service positions
Delivery checked against the plan and delivery note before fitting starts
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
Sink, tap and appliances connected to the existing water, waste and power points
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Laminate or wood worktops cut, jointed, sealed and fixed down

What should you budget for fit-only kitchen fitting in Coulsdon?

The figures below are guide prices for Coulsdon, including VAT and adjusted for typical costs across London. The fixed price comes after we have measured up. Prices in London usually run above the national guide, mainly because labour and parking cost more.

What should you budget for fit-only kitchen fitting in Coulsdon?
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£2,000–£3,200
Medium kitchen (10–15 units)As above	£3,200–£4,600
Large kitchen (15+ units, island or tall larders)As above	£4,600–£5,800
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£230–£360 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Coulsdon homes

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

What rules apply to fit-only kitchen fitting in Coulsdon?

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Getting the most from your fit-only kitchen fitting

Order handles in the right quantity with one or two spares; doors and drawers cannot be finished without them, and missing handles hold up sign-off.
Book the fit for a date after the full delivery has arrived in Greater London; a split delivery is a common reason for a fit stalling halfway.
Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste are easy to leave off an order.

Questions about fit-only kitchen fitting in Coulsdon

How much does fit-only kitchen fitting cost in Coulsdon?

For a small kitchen of 5 to 10 units, budget around £2,000 to £3,200 including VAT in Coulsdon. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you cover all of Coulsdon?

Yes. We work across Coulsdon, including the CR5 postcode district, and nearby towns such as Purley and Banstead. Book a free survey visit and we will arrange a time that suits you.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Also covering nearby towns

Close to Coulsdon? We cover these nearby towns too: