Fit-only kitchen fitting in Corby

Is fit-only kitchen fitting right for your Corby kitchen?

Some Corby households have a kitchen waiting in a spare room after a fitter dropped out, and need the boxes checked and the fit planned again from the start.

If your kitchen is ordered for delivery to your Corby home and the retailer does not offer fitting, fit only covers the labour to put it in properly. Homes right across Corby are covered, as are nearby places such as Kettering, Oundle and the villages in between.

What we cover for fit-only kitchen fitting in Corby

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Sink, tap and appliances connected to the existing water, waste and power points
Free survey visit to check your plan, the room and the service positions
Delivery checked against the plan and delivery note before fitting starts
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Base, wall and tall units positioned, levelled on their legs and fixed to the wall

Guide prices for fit-only kitchen fitting in Corby

As a starting point for Corby, these ranges include VAT at 20% and allow for typical labour costs in the East Midlands. Costs in the East Midlands sit close to the national guide.

Guide prices for fit-only kitchen fitting in Corby
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,500–£2,400
Medium kitchen (10–15 units)As above	£2,400–£3,400
Large kitchen (15+ units, island or tall larders)As above	£3,400–£4,400
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£170–£270 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Kitchens in homes around Corby

Typical homes in this part of Northamptonshire include ironstone cottages, Victorian terraces, 1930s semis and post-war new town houses. Victorian terraces in Northampton and Kettering often have a long galley behind the back room, while post-war houses in Corby tend to have a compact rectangular kitchen.

Terraced streets with on-street parking can make unloading slow, and village houses on narrow lanes may need a smaller delivery vehicle for long worktops. Water across Northamptonshire is hard, so limescale on taps, sinks and boiling water taps is likely, and a scale-reducing filter is worth considering.

Regulations for kitchen work in Corby

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Listed ironstone cottages and homes in village conservation areas may need listed building consent or planning permission for new vents or changes to historic fabric.

Getting the most from your fit-only kitchen fitting

Leave appliance manuals in their boxes; they give the housing sizes and ventilation gaps needed to install each appliance correctly in your Corby kitchen.
Order handles in the right quantity with one or two spares; doors and drawers cannot be finished without them, and missing handles hold up sign-off.
Book the fit for a date after the full delivery has arrived in Northamptonshire; a split delivery is a common reason for a fit stalling halfway.
Check the order includes filler panels, end panels, plinths, cornice or light rail, and enough legs and plinth clips for every base unit.

Questions about fit-only kitchen fitting in Corby

How much does fit-only kitchen fitting cost in Corby?

For a small kitchen of 5 to 10 units, budget around £1,500 to £2,400 including VAT in Corby. That reflects typical costs in the East Midlands; we confirm the actual figure in writing once we have measured up.

Which parts of Corby do you work in?

All of them. Our Northamptonshire coverage takes in the whole of Corby, including the NN17 postcode district, as well as surrounding towns such as Kettering. If you are unsure, send us your postcode.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

Also covering nearby towns

The same service is available a short drive from Corby, including: