Fit-only kitchen fitting in Canning Town

What prompts fit-only kitchen fitting in Canning Town?

Some Canning Town households have a kitchen waiting in a spare room after a fitter dropped out, and need the boxes checked and the fit planned again from the start.

If your kitchen is ordered for delivery to your Canning Town home and the retailer does not offer fitting, fit only covers the labour to put it in properly. Our Greater London coverage reaches every part of Canning Town (E16) and out towards West Ham.

What does the job involve?

After the survey visit we write the scope down. For fit-only kitchen fitting in Canning Town it usually covers:

Packaging and offcuts cleared, with removal of the old kitchen available as an extra
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Delivery checked against the plan and delivery note before fitting starts
Sink, tap and appliances connected to the existing water, waste and power points
Base, wall and tall units positioned, levelled on their legs and fixed to the wall

What does fit-only kitchen fitting cost in Canning Town?

Typical fit-only kitchen fitting prices for homes in Canning Town, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What does fit-only kitchen fitting cost in Canning Town?
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£2,000–£3,200
Medium kitchen (10–15 units)As above	£3,200–£4,600
Large kitchen (15+ units, island or tall larders)As above	£4,600–£5,800
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£230–£360 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Canning Town?

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in Canning Town

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

Order handles in the right quantity with one or two spares; doors and drawers cannot be finished without them, and missing handles hold up sign-off.
Leave appliance manuals in their boxes; they give the housing sizes and ventilation gaps needed to install each appliance correctly in your Canning Town kitchen.
Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Store the boxes flat in a dry, heated room rather than a damp garage, so doors and carcasses do not swell or warp before fitting.

Questions about fit-only kitchen fitting in Canning Town

How much does fit-only kitchen fitting cost in Canning Town?

For a small kitchen of 5 to 10 units, budget around £2,000 to £3,200 including VAT in Canning Town. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Can you measure up in Canning Town before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Canning Town. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Nearby places we cover

Neighbouring towns where we offer fit-only kitchen fitting: