Cooker hood installation in Marlborough

What prompts cooker hood installation in Marlborough?

Some Marlborough households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.

Homeowners in Marlborough adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up. Marlborough sits about 10 miles south of Swindon, and our Wiltshire coverage takes in everything in between.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Marlborough covers:

Recirculating hoods fitted with carbon filters, and their limits explained
Island and ceiling hoods fixed into the ceiling structure by two people
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Core drilling through the outside wall and an external grille fitted and sealed
Short, straight runs of rigid ducting wherever the route allows
Power supply connected by an electrician and tested to BS 7671

Guide prices for cooker hood installation in Marlborough

As a starting point for Marlborough, these ranges include VAT at 20% and allow for typical labour costs in the South West. For the South West, these ranges are close to the national figures.

Guide prices for cooker hood installation in Marlborough
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£120–£250
New ducted hood through an outside wallCore drilling, ducting run and external grille	£310–£930
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£310–£650
Recirculating hood fittedNo ducting; carbon filters need replacing	£120–£310

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

House types around Marlborough and what they mean for a kitchen

Across Wiltshire you will often find thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates, and each shapes the kitchen differently. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.

Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help. Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance.

What rules apply to cooker hood installation in Marlborough?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.

Tips before you start

Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
Before choosing a hood for your Marlborough kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
Check whether your Marlborough home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.

Questions about cooker hood installation in Marlborough

How much does cooker hood installation cost in Marlborough?

Cooker hood installation in Marlborough typically costs £120 to £250 including VAT for a like-for-like cooker hood swap, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Marlborough as well?

Yes. As well as Marlborough itself, we cover the rest of Wiltshire and nearby towns such as Swindon and Devizes. The process is the same wherever the kitchen is.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Cooker hood installation near Marlborough

Neighbouring towns where we offer cooker hood installation: