Cooker hood installation in Launceston

Thinking about cooker hood installation in Launceston?

If your Launceston house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.

If your Launceston kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test. We cover all of Launceston, including the PL15 postcode district, and travel out to neighbouring towns across Cornwall.

What does the job involve?

After the survey visit we write the scope down. For cooker hood installation in Launceston it usually covers:

Hood fixed at the height set by the hood and hob manufacturers
Recirculating hoods fitted with carbon filters, and their limits explained
Island and ceiling hoods fixed into the ceiling structure by two people
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Core drilling through the outside wall and an external grille fitted and sealed
Short, straight runs of rigid ducting wherever the route allows

Cooker hood installation prices in Launceston

As a starting point for Launceston, these ranges include VAT at 20% and allow for typical labour costs in the South West. Costs in the South West sit close to the national guide.

Cooker hood installation prices in Launceston
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£120–£250
New ducted hood through an outside wallCore drilling, ducting run and external grille	£310–£930
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£310–£650
Recirculating hood fittedNo ducting; carbon filters need replacing	£120–£310

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

The housing mix across Cornwall includes granite and slate cottages, Victorian terraces, post-war bungalows and converted barns, so no two kitchen fits are quite alike. Older stone cottages often have a small, low-ceilinged kitchen with uneven walls, while post-war bungalows tend to have a square kitchen beside a separate dining area.

Mains water across most of Cornwall is soft, which is kinder to taps and appliances, so heavy limescale build-up is rarely a problem. Narrow lanes, steep harbour streets and cottages with no parking outside can make delivering long worktops tricky, so delivery day needs planning in advance.

Building regulations, electrics and gas in Launceston

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Where a cottage is listed or sits in one of the many harbour-town conservation areas, consent may be needed before a new extractor vent is cut through an outside wall.

Tips before you start

Check whether your Launceston home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
If your Launceston home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Before choosing a hood for your Launceston kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.

Questions about cooker hood installation in Launceston

How much does cooker hood installation cost in Launceston?

Cooker hood installation in Launceston typically costs £120 to £250 including VAT for a like-for-like cooker hood swap, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Launceston?

Yes. We work across Launceston, including the PL15 postcode district, and nearby towns such as Tavistock and Liskeard. Book a free survey visit and we will arrange a time that suits you.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Cooker hood installation near Launceston

Neighbouring towns where we offer cooker hood installation: