Cooker hood installation · Highlands
Cooker hood installation in Inverness
If you live in Inverness and need cooker hood installation, we can measure the room, send an itemised written quote and book every trade in the right order until the kitchen is handed over.
Why cooker hood installation for an Inverness home?
Homeowners in Inverness adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up.
If your Inverness kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test. We cover all of Inverness, including the IV2 postcode district, and travel out to neighbouring towns across the Highlands.
What is in a typical job?
The exact scope is agreed after the survey, but a typical job in Inverness covers:
- Core drilling through the outside wall and an external grille fitted and sealed
- Island and ceiling hoods fixed into the ceiling structure by two people
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
- Hood fixed at the height set by the hood and hob manufacturers
- Power supply connected by an electrician and tested to BS 7671
- Survey of the hob position, duct route, outside wall and any open-flued appliance
How much does cooker hood installation cost in Inverness?
The figures below are guide prices for Inverness, including VAT and adjusted for typical costs across Scotland. The fixed price comes after we have measured up. Costs across Scotland tend to sit under UK averages, which these ranges reflect.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £110–£230 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £280–£850 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £280–£590 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £110–£280 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Local homes and their kitchens
You will find stone crofthouses, Victorian villas, post-war council-built houses and timber-framed kit houses throughout the Highlands. Older crofthouses often have a small kitchen in a lean-to, while Victorian villas in Inverness and Nairn tend to have separate kitchens with room to open up.
Long distances, single-track roads and winter weather can affect delivery and fitting days, so lead times and worktop lengths need planning well in advance. Mains water across the Highlands is soft, though many remote homes rely on private supplies, which may need testing and filtering before a boiling water tap goes in.
Regulations for kitchen work in Inverness
In Scotland, standard 3.14 of the domestic Technical Handbook expects kitchens to have extract ventilation, and a recirculating hood alone does not remove moisture. Fitting an extractor fan or a ducted hood does not normally need a building warrant. In a flat, a new vent through a shared outside wall may need the other owners' agreement and planning permission, and a listed building may need listed building consent. Where the room has an open-flued gas appliance, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
Homes in the Cairngorms National Park, listed buildings and conservation areas may need consent for a new external vent or changes to historic features.
Planning ahead
- Before choosing a hood for your Inverness kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
- Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
- Check whether your Inverness home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
Questions about cooker hood installation in Inverness
How much does cooker hood installation cost in Inverness?
Cooker hood installation in Inverness typically costs £110 to £230 including VAT for a like-for-like cooker hood swap, based on prices in Scotland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Can you measure up in Inverness before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Inverness. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Cooker hood installation near Inverness
We also carry out cooker hood installation in these towns near Inverness:
- Cooker hood installation in Dingwall
- Cooker hood installation in Nairn
- Cooker hood installation in Alness
- Cooker hood installation in Forres
- Cooker hood installation across the Highlands