Cooker hood installation · Somerset
Cooker hood installation in Clevedon
Whether your Clevedon kitchen is a narrow galley or an open-plan room, cooker hood installation follows the same careful order: survey, written scope, fit and a final check together.
Is cooker hood installation right for your Clevedon kitchen?
If condensation runs down the windows of your Clevedon kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run.
A new kitchen in a Clevedon home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together. Our Somerset coverage reaches every part of Clevedon (BS21) and out towards Nailsea.
What we cover for cooker hood installation in Clevedon
The exact scope is agreed after the survey, but a typical job in Clevedon covers:
- Recirculating hoods fitted with carbon filters, and their limits explained
- Short, straight runs of rigid ducting wherever the route allows
- Power supply connected by an electrician and tested to BS 7671
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Core drilling through the outside wall and an external grille fitted and sealed
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in Clevedon?
The figures below are guide prices for Clevedon, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. Prices across the South West are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £120–£250 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £310–£930 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £310–£650 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £120–£310 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
What kind of kitchens do we fit in Clevedon?
In and around Clevedon, homes range across Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.
Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well. Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower.
Building regulations, electrics and gas in Clevedon
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.
Getting the most from your cooker hood installation
- Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
- Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
- If your Clevedon home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
- For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
Questions about cooker hood installation in Clevedon
How much does cooker hood installation cost in Clevedon?
Cooker hood installation in Clevedon typically costs £120 to £250 including VAT for a like-for-like cooker hood swap, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover all of Clevedon?
Yes. We work across Clevedon, including the BS21 postcode district, and nearby towns such as Nailsea and Portishead. Book a free survey visit and we will arrange a time that suits you.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
How high should a cooker hood be above the hob?
At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.
Nearby places we cover
The same service is available a short drive from Clevedon, including:
- Cooker hood installation in Nailsea
- Cooker hood installation in Portishead
- Cooker hood installation in Weston-super-Mare
- Cooker hood installation in Kingswood
- Cooker hood installation in Burnham-on-Sea
- Cooker hood installation in Keynsham
- Cooker hood installation across Somerset