Cooker hood installation in Boston

Who usually needs cooker hood installation in Boston?

Cooks across Lincolnshire who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead.

Homeowners in Boston adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up. Homes right across Boston are covered, as are nearby places such as Spalding, Sleaford and the villages in between.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Boston covers:

Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Power supply connected by an electrician and tested to BS 7671
Island and ceiling hoods fixed into the ceiling structure by two people
Recirculating hoods fitted with carbon filters, and their limits explained
Core drilling through the outside wall and an external grille fitted and sealed
Short, straight runs of rigid ducting wherever the route allows

Guide prices for cooker hood installation in Boston

As a starting point for Boston, these ranges include VAT at 20% and allow for typical labour costs in the East Midlands. Prices across the East Midlands are broadly in line with UK averages.

Guide prices for cooker hood installation in Boston
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£120–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£290–£870
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£290–£610
Recirculating hood fittedNo ducting; carbon filters need replacing	£120–£290

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes around Boston

The housing mix across Lincolnshire includes Victorian terraces, post-war council-built houses, farmhouses and seaside bungalows, so no two kitchen fits are quite alike. Expect a narrow back kitchen in many Victorian terraces in Lincoln and Grimsby, while bungalows on the coast and in villages usually have a simple square kitchen.

Lincolnshire's mains water is mostly hard, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter is a sensible addition. Long rural roads and farm tracks can affect delivery times and vehicle size, while terraced streets in the towns may have little parking near the front door.

Do you need approval for cooker hood installation in Boston?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Fitting a kitchen needs no planning permission, but listed buildings in historic town centres and homes in conservation areas may need consent for new vents.

Planning ahead

Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
If your Boston home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Before choosing a hood for your Boston kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.

Questions about cooker hood installation in Boston

How much does cooker hood installation cost in Boston?

Guide prices in Boston are about £120 to £230 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Boston before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Boston. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Cooker hood installation near Boston

We also carry out cooker hood installation in these towns near Boston: