Cooker hood installation in Bootle

When does cooker hood installation make sense in Bootle?

If your Bootle house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.

If your Bootle kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test. Our Merseyside coverage reaches every part of Bootle (L20) and out towards Litherland.

What we cover for cooker hood installation in Bootle

After the survey visit we write the scope down. For cooker hood installation in Bootle it usually covers:

Core drilling through the outside wall and an external grille fitted and sealed
Short, straight runs of rigid ducting wherever the route allows
Survey of the hob position, duct route, outside wall and any open-flued appliance
Island and ceiling hoods fixed into the ceiling structure by two people
Hood fixed at the height set by the hood and hob manufacturers
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present

Guide prices for cooker hood installation in Bootle

Typical cooker hood installation prices for homes in Bootle, including VAT and adjusted for the North West. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour rates in the North West are generally lower than in London and the South East, so these ranges are a little below the national guide.

Guide prices for cooker hood installation in Bootle
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£110–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£280–£860
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£280–£600
Recirculating hood fittedNo ducting; carbon filters need replacing	£110–£280

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of Merseyside include Victorian terraces, Victorian and Edwardian villas, 1930s semis and converted warehouse flats. Two-up two-down terraces often have a small back kitchen off the living room, while 1930s semis tend to have a separate kitchen with space to open into a dining room.

Terraced streets with back entries, city-centre flats with booked lifts and permit parking zones can all affect how and when a kitchen is delivered. Merseyside's mains water is soft, so limescale is rarely a big issue and taps, sinks and boiling water taps stay cleaner for longer.

What rules apply to cooker hood installation in Bootle?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Conservation areas and listed buildings are common in older parts of Liverpool and the Wirral, so a new vent on a visible wall may need consent.

Tips before you start

If you live in a flat in Merseyside, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
Before choosing a hood for your Bootle kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
If your Bootle home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.

Questions about cooker hood installation in Bootle

How much does cooker hood installation cost in Bootle?

Guide prices in Bootle are about £110 to £230 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Bootle as well?

Yes. As well as Bootle itself, we cover the rest of Merseyside and nearby towns such as Litherland and Kirkdale. The process is the same wherever the kitchen is.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Nearby places we cover

The same service is available a short drive from Bootle, including: