Cooker hood installation in Basildon

Why do people in Basildon choose cooker hood installation?

A new kitchen in a Basildon home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together.

Some Basildon households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob. Basildon sits about 11 miles west of Southend-on-Sea, and our Essex coverage takes in everything in between.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Basildon covers:

Core drilling through the outside wall and an external grille fitted and sealed
Power supply connected by an electrician and tested to BS 7671
Recirculating hoods fitted with carbon filters, and their limits explained
Survey of the hob position, duct route, outside wall and any open-flued appliance
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Island and ceiling hoods fixed into the ceiling structure by two people

Cooker hood installation prices in Basildon

Use these ranges to plan your budget. They include VAT, reflect costs in the East of England, and are firmed up once we have seen your Basildon kitchen. Expect costs in the East of England to sit somewhat above UK averages, reflecting local labour rates.

Cooker hood installation prices in Basildon
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£130–£260
New ducted hood through an outside wallCore drilling, ducting run and external grille	£320–£970
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£320–£680
Recirculating hood fittedNo ducting; carbon filters need replacing	£130–£320

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Basildon homes

The housing mix across Essex includes Victorian terraces, 1930s semis, post-war new town houses and chalet bungalows, so no two kitchen fits are quite alike. In Harlow and Basildon, new-town houses often have a compact galley, while chalet bungalows and 1930s semis tend to have a small kitchen next to the dining area.

Limescale is a fact of life in most of Essex because the water is hard, so a filter for a boiling water tap and regular descaling make sense. Busy commuter towns often have tight on-street parking, and estate houses with small front gardens can make it awkward to unload long worktops.

What rules apply to cooker hood installation in Basildon?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Most kitchen fits need no planning permission, but weatherboarded listed cottages and homes in village conservation areas may need consent for a new external vent.

Tips before you start

Before choosing a hood for your Basildon kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
If you live in a flat in Essex, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.

Questions about cooker hood installation in Basildon

How much does cooker hood installation cost in Basildon?

For a like-for-like cooker hood swap, budget around £130 to £260 including VAT in Basildon. That reflects typical costs in the East of England; we confirm the actual figure in writing once we have measured up.

Do you cover all of Basildon?

Yes. We work across Basildon, including the SS14 postcode district, and nearby towns such as Pitsea and Stanford-le-Hope. Book a free survey visit and we will arrange a time that suits you.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Cooker hood installation near Basildon

Close to Basildon? We cover these nearby towns too: