Cooker hood installation in Aylesbury

Is cooker hood installation right for your Aylesbury kitchen?

Cooks across Buckinghamshire who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead.

If your Aylesbury kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test. Kitchens in every part of Aylesbury are covered, and the survey visit is free wherever you are in Buckinghamshire.

What is in a typical job?

The exact scope is agreed after the survey, but a typical job in Aylesbury covers:

Core drilling through the outside wall and an external grille fitted and sealed
Island and ceiling hoods fixed into the ceiling structure by two people
Short, straight runs of rigid ducting wherever the route allows
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Power supply connected by an electrician and tested to BS 7671
Hood fixed at the height set by the hood and hob manufacturers

What does cooker hood installation cost in Aylesbury?

Typical cooker hood installation prices for homes in Aylesbury, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

What does cooker hood installation cost in Aylesbury?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£140–£280
New ducted hood through an outside wallCore drilling, ducting run and external grille	£340–£1,000
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£340–£720
Recirculating hood fittedNo ducting; carbon filters need replacing	£140–£340

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Aylesbury?

Typical homes in this part of Buckinghamshire include new town estate houses, 1930s semis, Victorian terraces and detached village houses. Estate houses in Milton Keynes often have a compact L-shaped or galley kitchen, while larger detached homes in the Chilterns may have room for an island.

Village lanes and long gravel drives can be awkward for large delivery lorries, while town-centre flats may have limited parking and no lift. Buckinghamshire's water is hard, with much of it drawn from chalk, so limescale on taps, sinks and boiling water taps is worth planning for.

Building regulations, electrics and gas in Aylesbury

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Kitchen work rarely needs planning permission, though listed cottages and houses in village conservation areas may need consent for new vents or changes to historic features.

Planning ahead

For an island hood in your Aylesbury kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Before choosing a hood for your Aylesbury kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
If your Aylesbury home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.

Questions about cooker hood installation in Aylesbury

How much does cooker hood installation cost in Aylesbury?

For a like-for-like cooker hood swap, budget around £140 to £280 including VAT in Aylesbury. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Which parts of Aylesbury do you work in?

All of them. Our Buckinghamshire coverage takes in the whole of Aylesbury, including the HP19 and HP20 postcode districts, as well as surrounding towns such as Tring. If you are unsure, send us your postcode.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Nearby places we cover

The same service is available a short drive from Aylesbury, including: